Sony WAHTSA1 Operating Instructions - Page 8

Connecting the AC Power Cords (Mains Leads) Before connecting the AC power cords (mains leads) of your S-AIR main unit and the surround amplifier to wall outlets (mains), make sure that all speakers are connected. Setting up the Wireless System To use the wireless system, you need to set up the surround amplifier and your S-AIR main unit. Before setting, make sure that the wireless adapters are correctly inserted in the S-AIR main unit and surround amplifier. Front panel POWER / ON LINE Indicator POWER POWER POWER/ON LINE PHONES PHONES jack Rear panel S-AIR ID switch EZW-RT10 S-AIR ID A B C PAIRING SPEAKER L SURROUND SELECTOR R SURROUND SURROUND BACK SURROUND SELECTOR switch ID setting By matching the ID of the surround amplifier and your S-AIR main unit, you can establish sound transmission. You can also use multiple S-AIR products by setting a different ID for each product. Setting up the S-AIR main unit 1 Turn on the S-AIR main unit. The system turns on. 2 Set up the S-AIR main unit so it is ready for ID setting. 3 Select the ID for the S-AIR main unit. You can select any ID (A, B, or C). For details, refer to the operating instructions of the S-AIR main unit. Setting up the surround amplifier 1 Set the SURROUND SELECTOR switch (SURROUND or SURROUND BACK) of the surround amplifier to match the S-AIR main unit. 2 Set the S-AIR ID switch of the surround amplifier to match the ID (A, B, or C) of the S-AIR main unit. 8US