Sony WI-C310 Help Guide - Page 28

3. Touch the switch to turn on the Bluetooth function. 4 Touch [WI-C200] or [WI-C310]. If Passkey (*) input is required, input "0000". The headset and iPhone are paired and connected with each other. You will hear a voice guidance "Bluetooth connected". If they are not connected, see "Connecting to a paired iPhone ". If [WI-C200] or [WI-C310] does not appear on the display, try again from step 3. * A Passkey may be called "Passcode", "PIN code", or "Password". Hint The above procedure is an example. For more details, refer to the operating instructions supplied with the iPhone. To delete all Bluetooth pairing information, see "Initializing the headset to restore factory settings". Note If pairing is not established within 5 minutes, pairing mode is canceled, and the headset turns off. In this case, start the operation over from step 1. Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases: Pairing information has been deleted after repair, etc. When a 9th device is paired. The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration information of the paired device with the oldest connection date is overwritten with the information for the new device. When the pairing information for the headset has been deleted from the Bluetooth device. When the headset is initialized. All of the pairing information is deleted. In this case, delete the pairing information for the headset from the device and then pair them again. The headset can be paired with multiple devices, but can only play music from 1 paired device at a time. Related Topic How to make a wireless connection to Bluetooth devices Connecting to a paired iPhone Listening to music from a device via Bluetooth connection Disconnecting Bluetooth connection (after use) Initializing the headset to restore factory settings 28