Sony XAV-68BT Operating Instructions - Page 29

The USB device takes longer to play.  The USB device contains large-sized files or files with a complicated tree structure. The sound is intermittent.  The sound may be intermittent at a high bit rate of more than 320 kbps. BLUETOOTH function The other BLUETOOTH device cannot detect this unit.  Set [Bluetooth Connection] to [ON] (page 18).  While connecting to a BLUETOOTH device, this unit cannot be detected by another device. Terminate the current connection and search for this unit from the other device. The disconnected device can be reconnected by selecting from the list of registered devices. Connection is not possible.  Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear.  Depending on the status of the other device, it may not be possible to obtain the name. There is no ringtone.  Raise the volume while receiving a call. The talker's voice volume is low.  Raise the volume during a call. The other party says that the volume is too low or high.  Adjust the [MIC Gain] level (page 16). Echo or noise occurs during call conversations.  Reduce the volume.  If ambient noise other than the phone call sound is loud, try reducing this noise.  Shut the window if road noise is loud.  Lower the air conditioner if the air conditioner is loud. The phone sound quality is poor.  Phone sound quality depends on reception conditions of the cellular phone.  Move your car to a place where you can enhance the cellular phone's signal if the reception is poor. The volume of the connected BLUETOOTH device is low or high.  Volume level will differ depending on the BLUETOOTH device.  Reduce the volume level differences between this unit and the BLUETOOTH device (page 12). The sound skips during audio streaming.  Reduce the distance between the unit and the BLUETOOTH device.  If the BLUETOOTH device is stored in a case which interrupts the signal, remove the case while using the device.  Several BLUETOOTH devices or other devices which emit radio waves are used nearby.  Turn off the other devices.  Increase the distance between the unit and other devices.  Playback sound stops momentarily when this unit is connecting to a cellular phone. This is not a malfunction. You cannot control the connected BLUETOOTH device during audio streaming.  Check that the connected BLUETOOTH device supports AVRCP. Some functions do not work.  Check that the connecting device supports the functions in question. A call is answered unintentionally.  The connecting phone is set to start a call automatically.  [Auto Answer] of this unit is set to [ON] (page 16). Pairing failed due to time out.  Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time by setting a single digit passkey. The BLUETOOTH function cannot be operated.  Exit the source by pressing and holding SOURCE for 1 second, then turn on the unit. No sound is output from the car speakers during a handsfree call.  If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Siri Eyes Free is not activated.  Perform the handsfree registration for an iPhone that supports Siri Eyes Free.  Set the Siri function on the iPhone to on.  Cancel the BLUETOOTH connection with the iPhone and the unit, and reconnect. Error displays/messages Bluetooth Connection Error  An error has occurred between this unit and the BLUETOOTH phone.  Check the BLUETOOTH signal is set to on for this unit or the BLUETOOTH phone.  Try pairing again. 29GB