Sony XAV-AX200 Operating Instructions - Page 16
Settings, Basic Setting Operation, General Settings - steering wheel controls
View all Sony XAV-AX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Settings Basic Setting Operation You can set items in the following setup categories: General Settings, Sound Settings, Visual Settings 1 Press HOME, then touch [Settings]. 2 Touch one of the setup category icons. The items that can be set differ depending on the source and settings. 3 Move the scrollbar up and down to select the desired item. To return to the previous display Touch . To switch to the playback screen Touch . General Settings Language Selects the display language: [English], [Español], [Français], [Deutsch], [Italiano], [Nederlands], [Português [ ], [ ], [ ]. Demo Activates the demonstration: [OFF], [ON]. Date/Time Date Format Selects the format: [DD/MM/YY], [MM/DD/YY], [YY/MM/DD]. Time Format Selects the format: [12-hour], [24-hour]. Set Date/Time Sets the date and clock time manually. Beep Activates the operation sound: [OFF], [ON]. Dimmer Dims the display: [OFF], [Auto], [ON]. ([Auto] is available only when the illumination control lead is connected and works when the head light is turned on.) Dimmer Level Adjusts the brightness level when the dimmer is activated: -5 to +5. Touch Panel Adjust Adjusts the touch panel calibration if the touching position does not correspond with the proper item. Camera Input Selects the cameras connected to the camera input terminals: [Rear], [1], [2]. It also selects the view from the cameras: [OFF], [Normal], [Reverse] (mirror image). Rear Camera Line Setting Adjusts the length and/or position of the marker lines on the picture from the rear view camera by touching the arrow marks. To hide the marker lines, touch repeatedly until the marker line disappears. Steering Control Selects the input mode for the connected remote control. To prevent a malfunction, be sure to match the input mode with the connected remote control before use. Custom Input mode for the steering wheel remote control (follow the procedures of [Steering Control Custom] to register functions on the connected remote control). Preset Input mode for the wired remote control excluding the steering wheel remote control. Steering Control Custom The steering button panel appears. Press and hold the button you want to assign to the steering wheel. The button on the panel lights up (standby). Press and hold the button on the steering wheel you want to assign the function to. The button on the panel will change the color (highlighted or encircled by an orange line). To register other functions, repeat steps and . (Available only when [Steering Control] is set to [Custom].) Notes • While making settings, the connected remote control cannot be used even though some functions have already been registered. Use the buttons on the unit. • If an error occurs while registering, all the registered information is cleared. Restart registration from the beginning. • This function may not be available on some vehicles. For details on the compatibility of your vehicle, visit the support site on the back cover. Bluetooth Connection Activates the BLUETOOTH signal: [OFF], [ON], [Pairing] (enters into pairing standby mode). 16GB