Sony XAV-AX200 Operating Instructions - Page 24
Radio reception, Picture, Sound, Disc operation, The disc does not play.
View all Sony XAV-AX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Menu items cannot be selected. Unavailable menu items are displayed in gray. The operation buttons do not function. Press the reset button (page 5). Radio reception The stations cannot be received. The sound is hampered by noise. The connection is not correct. - Connect the REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a car's antenna (aerial) booster (only when your car has built-in radio antenna (aerial) in the rear/side glass). - Check the connection of the car antenna (aerial). - If the auto antenna (aerial) will not extend, check the connection of the power antenna (aerial) control lead. Preset tuning is not possible. The broadcast signal is too weak. RDS PTY displays [PTY not found.]. The current station is not a RDS station. RDS data has not been received. The station does not specify the program type. Picture There is no picture/picture noise occurs. A connection has not been made correctly. Check the connection between this unit and other equipment and set the input selector of the equipment to the source corresponding to this unit. The disc is defective or dirty. Installation is not correct. - Install the unit at an angle of less than 45° in a sturdy part of the car. The parking cord (light green) is not connected to the parking brake switch cord, or the parking brake is not applied. The picture does not fit in the screen. The aspect ratio is fixed on the playback source. There is no picture/picture noise occurs in the rear monitor. The color system setting is incorrect. - Set the color system to [PAL] or [NTSC] according to the connected monitor (page 18). A picture from the camera is displayed on this unit. - No picture appears in the rear monitor if a picture from the camera is displayed on this unit. 24GB Only DVD/USB video playing on this unit can be displayed in the rear monitor. While displaying the picture from the cameras or car navigation system on this unit, the picture from DVD/USB video is not displayed in the rear monitor. Sound There is no sound/sound skips/sound cracks. A connection has not been made correctly. Check the connection between this unit and the connected equipment and set the input selector of the equipment to the source corresponding to this unit. The disc is defective or dirty. Installation is not correct. - Install the unit at an angle of less than 45° in a sturdy part of the car. The unit is in pause/reverse/fast-forward mode. The settings for the outputs are not made correctly. The DVD audio level is too low (page 13). The volume is too low. The ATT function is activated. The format is not supported. - Check if the format is supported by this unit (page 20). Sound is noisy. Keep cords and cables away from each other. Disc operation The disc does not play. The disc is defective or dirty. The disc is not playable. The DVD is not playable due to the region code. The disc format and file version are incompatible with this unit (page 19). Press to remove the disc. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. During playback, touch , then make the desired settings. Multilingual tracks, multilingual subtitles, or multi-angles are not recorded on the DVD. The DVD prohibits changing. The disc will not eject. The disc will not insert. Press and hold the disc eject button.