Sony XBR-49X850B i-Manual (Online - Printable PDF) - Page 70
Settings] →, Picture & Display] →, 3D Settings] → the desired option.
View all Sony XBR-49X850B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
SimulView™. To adjust the 3D settings You can adjust the following 3D settings. Press the HOME button, select [Settings] → [Picture & Display] → [3D Settings] → the desired option. [3D Display] Opens [3D Display] to switch the display modes. [3D Depth Adjustment] Adjusts the depth of 3D pictures on the screen (available only for content with 3D signals). Select [Auto(High)] to always optimize to a visually comfortable depth. Select [Auto(Low)] to provide a visually comfortable depth which is close to the original picture. You can also manually set the adjustment value. [Simulated 3D Effect] Heightens/lessens the 3D effect when you display 2D pictures in simulated 3D. [Auto 3D] Select [Auto 1] to switch the 3D display mode automatically when a 3D signal is detected. If no 3D signal is detected, select [Auto 2], which will analyze the image for 3D information and switch the 3D display mode automatically. Select [Off] to prevent the 3D display mode from being automatically selected. Depending on the input signal or format, the 3D display mode may not switch automatically. In such a case, press the 3D button to select the 3D display mode manually. (When using the Touchpad Remote Control, press the Control Bar ( ), slide the touchpad to highlight the 3D button, then press the touchpad to select.) [3D Signal Notification] Notifies when a 3D signal is detected. Notes When [3D Display] is set to [Off], SimulView™ mode cannot be used. Depending on the image, one player may see another player's image when using SimulView™ mode. 3D effect is available only when pictures are displayed in full screen. Recommended viewing angle and distance may vary depending on the TV's location and room conditions. 64