Sony XBR-52LX900 Setup Guide (Operating Instructions) - Page 4

Checking the accessories AC power cord (1) Remote control (1)*1 Size AAA batteries (2) Table-Top Stand (1)*2 (except XBR-60LX900) Fixing screws for Table-Top Stand (M5 × 16) (4) (except XBR-60LX900) Assembling screws for Table-Top Stand (M5 × 16) (4) (XBR-40LX900 only) Bottom cover (1)*3 Stand rear cover (1)*4 Black spacers (4)*5 (XBR-52/46/40LX900 only) Silver spacers (4)*5 (XBR-60LX900 only) Screws (M6 × 20) (4)*5 (XBR-60LX900 only) 3D Glasses (battery included) (2) Pouch for 3D Glasses (2) *1 Please refer to the model name printed on the remote control. *2 XBR-40LX900 requires assembling. Refer to other leaflet to assemble the Table-Top Stand. *3 For XBR-60LX900, the bottom cover is factoryattached to the TV. *4 For XBR-60LX900, the stand rear cover is factory-attached to the Table-Top Stand. *5 These screws and spacers are required when installing an optional Wall-Mount Bracket. You must use these screws instead of the ones provided with the bracket for safety reasons. Be sure to keep them in a safe place until you are ready to use the Wall-Mount Bracket. See page 23 for the recommended Wall-Mount Bracket for your TV. Inserting batteries into the remote control 1 Remove the protection sheet. 2 Push and slide the cover upward. Guidelines for Remote Control • Point your remote control directly at the IR sensor located on your TV. • Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV. • Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps. • If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted. 4