Sony XBR-55A1E Reference Guide - Page 5
Precautions, warm water. - wall mount
View all Sony XBR-55A1E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4 Anchor the TV to the wall by using bolts, wall anchor and chain (or rope). Wall-mount holes Rope or chain (not supplied) M6 eye bolts (not supplied) Wall-anchor (not supplied) Please see below illustration for M6 eye bolt length. 10 mm - 14 mm M6 eye bolt TV's rear cover Note • Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall. • Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended. Precautions How to care for your BRAVIA TV Safety is very important. Please read and follow the safety documentation (Safety Booklet) separately provided. Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV. • Wipe the screen gently with a soft cloth. • Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water. • If using a chemically pretreated cloth, please follow the instruction provided on the package. • Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set. • Never use strong solvents such as a thinner, alcohol or benzine for cleaning. • Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated. • Do not touch the TV if your hand is covered in any chemical substance such as hand cream or sunblock. The TV should also be placed on a stable surface to prevent it from toppling over (see page 4). If you have young children or pets at home, check regularly to ensure the TV is securely fastened. US Recommendation for an F type plug Projection of the inner wire from the connection part must be less than 1.5 mm. 7 mm max. 1.5 mm max. (Reference drawing for an F type plug) 5US