Sony XBR-65X800G Reference Guide - Page 14
Detaching the Table-Top Stand from the TV, remove the screws.
View all Sony XBR-65X800G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Detaching the Table-Top Stand from the TV XBR-49/43X800G only 1 To detach the Table-Top Stand from the TV, remove the screws. Note • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV with the LCD panel facing down. • When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV. • Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth when removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD display. 2 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied). Wall-Mount Bracket (not supplied) Screw (not supplied) Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. 14US