Sony XR-77A80J Reference Guide - Page 9
not attempt to install it yourself.
View all Sony XR-77A80J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
For product protection and safety reasons, Sony strongly recommends that installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself. • Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. • The screws for installing the Wall-Mount Bracket to the TV are not supplied. • The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please refer to below illustration. 10 mm - 14 mm 1 Remove the screws from the rear of the TV. US 2 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied). Wall-Mount Bracket (not supplied) Screw (M6) Wall-Mount Bracket TV's rear cover • Refer to the following table for wall-mount hole pattern. Model Name XR-77A80J XR-77A80CJ XR-65A80J XR-65A80CJ XR-55A80J Wall-mount hole pattern × 300 × 300 mm Screw (not supplied) Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. • Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children. Note • Read the supplied safety documentation for additional safety information. • For more detailed information, visit Sony Customer Support website.* * Only on limited region/country/TV model. 9US