Stihl 046 Instruction Manual - Page 46
Storing the Machine
![]() |
View all Stihl 046 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Storing the Machine Rim sprocket Use a screwdriver to •••• remove the E-clip. Take off the washer and rim sprocket. Examine splines on clutch drum - if wear marks are severe, fit a new clutch drum: Pull clutch drum and needle cage off the crankshaft - clean the crankshaft stub and needle cage, and lubricate with STlHL grease (tube 0781 120 1111). Reassemble with new rim sprocket and new clutch drum, if necessary - • fit rim sprocket with cavities facing outward refit washer and •• E-clip on the crankshaft. Use only original STIHL clutch drums to ensure correct operation of the chain brake. Spur sprocket Use a screwdriver to remove the E-clip. •• Pull the washer, spur sprocket and needle cage off the crankshaft. Clean the crankshaft stub and needle cage, and lubricate with STIHL grease (tube 0781 120 1111). Reassemble with new spur sprocket After fitting the clutch drum, rotate it about one turn to engage oil pump drive refit washer and E-clip on the crankshaft. Use only original STIHL chain sprockets to ensure correct operation of the chain brake. K For periods of about 3 months or longer: • Drain and clean the fuel tank in a well ventilated area. • Run engine until carburetor is dry this helps prevent the carburetor diaphragms sticking together. • Remove the saw chain and guide bar, clean them and protect with corrosion inhibiting oil. • Thoroughly clean the machine pay special attention to the cylinder fins and air filter. • If you use a biological chain lubricant (e.g. STIHL Bioplus), fill the chain oil tank. • Store the machine in a dry and high or locked location - out of the reach of children and other unauthorized persons. 44 046
![](/manual_guide/products/stihl-046-instruction-manual-35d4033/46.png)