Stihl BG 46 Instruction Manual - Page 14

If the engine stops during warm-up or, As soon as engine runs

Get Stihl BG 46 PDF manuals and user guides View all Stihl BG 46 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

english / USA : Place the unit on the ground. : Make sure you have a firm footing: Hold the unit firmly on the ground with your left hand on the handle and press down. : Pull the starter grip slowly with your right hand until you feel it engage and then give it a brisk strong pull. Do not pull out the starter rope all the way - it might break. 295BA016 KN 295BA043 KN : Do not let the starter grip snap back. Guide it slowly back into the housing so that it can rewind properly. 5 If the engine does not start after 10 pulls with the choke lever set to e : Set choke to g , pull the starter rope five times, set choke to e and continue cranking. If engine is warm: : Continue cranking until engine runs (choke lever to e ) If the engine is cold: (choke position g) : Pull the starter rope five times. : Move the choke lever (5) to e : Continue cranking until engine runs. As soon as engine runs : Move setting lever forwards to end position. If the engine stops during warm-up or acceleration: : Repeat starting procedure as described under "If engine is cold" Your unit is now ready for operation. BG 46 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
13
BG 46
english / USA
:
Place the unit on the ground.
:
Make sure you have a firm footing:
Hold the unit
firmly
on the ground
with your left hand on the handle
and press down.
:
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – it might
break.
:
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that it can rewind properly.
If the engine is cold:
(choke position
g
)
:
Pull the starter rope five times.
:
Move the choke lever (
5
) to
e
:
Continue cranking until engine runs.
If the engine does not start after 10
pulls with the choke lever set to
e
:
Set choke to
g
, pull the starter
rope five times, set choke to
e
and
continue cranking.
If engine is warm:
:
Continue cranking until engine runs
(choke lever to
e
)
As soon as engine runs
:
Move setting lever forwards to end
position.
If the engine stops during warm-up or
acceleration:
:
Repeat starting procedure as
described under “If engine is cold”
Your unit is now ready for operation.
295BA016 KN
295BA043 KN
5