Stihl BGE 71 Product Instruction Manual - Page 13
Assembling the Vacuum, Attachment
View all Stihl BGE 71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Assembling the Vacuum Attachment BGE 71 only Your vacuum shredder can be switched on only when the elbow and suction tube are properly mounted. The union nuts activate a switch which closes the circuit to allow the motor to be switched on. N Disconnect the plug from the power supply. Mounting the Elbow 3 1 2 4 7 6 N Line up the recesses. N Push the elbow (5) into the fan housing stub (6) as far as stop. N Push the union nut (7) over the fan housing stub (6) and turn it in the direction of the arrow as far as the stop. You will hear the safety switch being activated. Assembling the Suction Tube 290BA006 KN English Mounting the Suction Tube 1 N Shut off the engine. N Press tab (1) towards fan housing, rotate intake screen (2) in direction of arrow as far as the stop, and lift it away. 290BA008 KN 290BA015 KN 290BA009 KN N Push the elbow (1) into the catcher bag (2) as far as the mark (smaller arrow). N Tighten strap (3) on catcher bag and press down the tab (4). Make sure the zipper on the catcher bag is closed. N Line up the arrows on the suction tube and extension tube. Push together and lock in position. 295BA080 KN N Line up the arrows (3). N Push the suction tube into the intake opening as far as the stop. BGE 61, BGE 71 11