Stihl BR 430 Product Instruction Manual - Page 17
Fueling, Information Before You, Start
View all Stihl BR 430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Fueling Open the fuel filler cap 1. 2. Preparations Before fueling, clean the fuel filler cap and the area around it so that dirt cannot fall into the tank. Thoroughly shake up the mixture in the canister before fueling your machine. To avoid the risk of burns or other injuries due to escaping gasoline vapors, open the fuel filler cap carefully so that any excess pressure in the tank can escape slowly. Never use a tool to open the bayonet catch. This could damage the cap and cause fuel to leak out. Do not spill any fuel and do not fill the tank up to the brim. N Press the cap down with your hand as far as possible, turn it counterclockwise (approx. 1/8 turn) and remove it. Fueling Take care not to spill fuel while fueling and do not overfill the tank. Close the fuel filler cap 1. 2. 0002BA014 KN English Information Before You Start With the engine stopped and before starting, check the air intakes between the backplate and powerhead for blockages and clean if necessary. Positions of setting lever - BR 350 1 2 Run position F Engine runs or is ready to start. Throttle trigger (2) can be moved to any position. Switch off engine † Ignition is interrupted, engine stops. The setting lever (1) is not locked in this position. It springs back to the run position F. The ignition is switched on again. 0009BA009 KN 0002BA015 KN N Fit the cap and turn it until it engages in the bayonet mount. N Press the cap down with your hand as far as possible and turn it clockwise (approx. 1/8 turn) until it engages completely. BR 350, BR 430 15