Stihl BR 430 Product Instruction Manual - Page 19

As soon as the engine runs - choke knob

Page 19 highlights

L H LA Cranking 0009BA012 KN N Press the fuel pump bulb at least eight times - even if the bulb is filled with fuel. Cold engine (cold start) English As soon as the engine runs BR 350 BR 430 0009BA016 KN 0009BA015 KN 0009BA022 KN 0009BA013 KN 0009BA017 KN N Push the choke knob in and turn it to c. Warm engine (warm start) N Push the choke knob in and turn it to o. Also use this setting if the engine has been running but is still cold. 0009BA014 KN N Place the unit securely on the ground and make sure that bystanders are well clear of the nozzle outlet. N Make sure you have a firm footing: Hold the unit with your left hand on the housing and put one foot against the base plate to prevent it slipping. N Pull the starter grip slowly with your right hand until you feel it engage and then give it a brisk strong pull. Do not pull out the starter rope to full length - it might otherwise break. N Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. N Continue cranking until the engine runs. N Operate the throttle trigger. N Choke knob automatically returns to the run position e when the throttle trigger is operated. At very low outside temperatures N Open throttle slightly - warm up the engine for a short period. BR 350, BR 430 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

BR 350, BR 430
English
17
N
Press the fuel pump bulb at least
eight times – even if the bulb is filled
with fuel.
Cold engine (cold start)
N
Push the choke knob in and turn it to
c
.
Warm engine (warm start)
N
Push the choke knob in and turn it to
o
.
Also use this setting if the engine has
been running but is still cold.
Cranking
N
Place the unit securely on the
ground and make sure that
bystanders are well clear of the
nozzle outlet.
N
Make sure you have a firm footing:
Hold the unit with your left hand on
the housing and put one foot against
the base plate to prevent it slipping.
N
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length –
it might otherwise break
.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Continue cranking until the engine
runs.
As soon as the engine runs
BR 350
BR 430
N
Operate the throttle trigger.
N
Choke knob automatically returns to
the run position
e
when the throttle
trigger is operated.
At very low outside temperatures
N
Open throttle slightly – warm up the
engine for a short period.
0009BA012 KN
H
LA
L
0009BA013 KN
0009BA014 KN
0009BA015 KN
0009BA016 KN
0009BA022 KN
0009BA017 KN