Stihl BR 550 Product Instruction Manual - Page 21

Starting / Stopping the, Engine - engine timing

Page 21 highlights

Starting / Stopping the Engine Starting the engine Cold engine (cold start) N Observe safety precautions. Start your unit on a clean, dustfree surface only to ensure that no dust is sucked in. N Turn the choke knob to l. Warm engine (warm start) Starting English N The setting lever (1) must be on F N Turn the choke knob to n. Also use this setting if the engine has been running but is still cold. 452BA115 KN N Press the fuel pump bulb at least five times - even if the bulb is filled with fuel. N Place the unit securely on the ground and make sure that bystanders are well clear of the nozzle outlet. N Make sure you have a firm footing: Hold the unit with your left hand on the housing and put one foot against the base plate to prevent it slipping. N Pull the starter grip slowly with your right hand until you feel it engage and then give it a brisk strong pull. Do not pull out the starter rope to full length - it might otherwise break. N Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. N Crank the engine until it begins to fire. After no more than three attempts, turn the choke knob to n. BR 500, BR 550, BR 600 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

BR 500, BR 550, BR 600
English
19
Starting the engine
N
Observe safety precautions.
N
The setting lever (1) must be on
F
N
Press the fuel pump bulb at least
five times – even if the bulb is filled
with fuel.
Cold engine (cold start)
N
Turn the choke knob to
l
.
Warm engine (warm start)
N
Turn the choke knob to
n
.
Also use this setting if the engine has
been running but is still cold.
Starting
N
Place the unit securely on the
ground and make sure that
bystanders are well clear of the
nozzle outlet.
N
Make sure you have a firm footing:
Hold the unit with your left hand on
the housing and put one foot against
the base plate to prevent it slipping.
N
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length –
it might otherwise break
.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Crank the engine until it begins to
fire. After no more than three
attempts, turn the choke knob to
n
.
Starting / Stopping the
Engine
Start your unit on a clean, dust-
free surface only to ensure that no
dust is sucked in.
452BA115 KN