Stihl BR 600 MAGNUM Product Instruction Manual - Page 15
Adjusting the Throttle, Cable - replacement
View all Stihl BR 600 MAGNUM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Wear Mark on Nozzle 452BA100 KN The front end of the nozzle is worn by ground contact during operation. Replace the nozzle when it has worn as far as the wear mark. Fitting the Transport Aid N Secure the blower tube to the handle on the backplate. When storing or transporting the machine: English Adjusting the Throttle Cable It may be necessary to correct the adjustment of the throttle cable after assembling the machine or after a prolonged period of operation. Adjust the throttle cable only when the unit is completely and properly assembled. N Set throttle trigger to the full throttle position - as far as stop. N Carefully screw home the screw in the throttle trigger until you feel initial resistance. N Secure the velcro strip to the blower tube - pull the flap through the buckle. BR 500, BR 550, BR 600 13