Stihl BR 600 MAGNUM Product Instruction Manual - Page 27
Spark Arresting Screen in, Muffler, Replacing the Starter Rope, and Rewind Spring
![]() |
View all Stihl BR 600 MAGNUM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Spark Arresting Screen in Muffler In some countries the muffler is equipped with a spark arresting screen. N If the engine is down on power, check the spark arresting screen in the muffler. N Wait for the muffler to cool down. Replacing the Starter Rope and Rewind Spring Replacing the Starter Rope English N Carefully remove the rope rotor with washer (4) and pawls (5). N Use a screwdriver to pry the rope out of the starter grip. N Remove the remaining rope from the rotor and starter grip. 1 213BA018 KN 2 1 N Loosen the screws (1). N Remove the scoop (2). 452BA090 KN N Take out the screws (1). N Remove the starter cover (2). N Thread the new rope through the starter grip and tie one of the special knots shown. N Pull the knot back into the grip. 3 N Remove the spark arresting screen (3). N Clean the spark arresting screen. If the screen is damaged or heavily carbonized, fit a new one. N Refit the spark arresting screen. N Fit the scoop. 452BA091 KN N Use a screwdriver or suitable pliers to remove the spring clip (3) from the starter post. The rewind spring may pop out and uncoil during this operation - take care to avoid the risk of injury. wear face protection and work gloves. BR 500, BR 550, BR 600 25
![](/manual_guide/products/stihl-br-500-product-instruction-manual-b7c1417/27.png)