Stihl FC 90 Product Instruction Manual - Page 15
Lawn edging - edger in use
View all Stihl FC 90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Lawn edging 241BA003 KN N Tighten down the wingnut clockwise. N Standing in the normal working position, check the depth of cut again and correct it if necessary, 90° English 1 241BA005 KN 241BA004 KN Do not adjust the deflector. The deflector has been set at the factory so that the arrow on the deflector and the open side point away from the operator. This ensures that cuttings and other debris are directed away from the machine and operator. 350BA022 KN N Starting the Engine N Start the cut at no less than half throttle and continue cutting at full throttle. N Hold and guide your edger so that the blade is vertical. N Cut steadily so that the engine is not lugged down - do not apply force. N Cut at no more than a normal walking pace. N Do not push the blade into the ground. N Always walk forwards when cutting, do not pull the unit towards you. N Edge at a steady pace to avoid having to make several passes. N Use the gunning sight (1) to line up the blade on the edge. FC 90 13