Stihl FC 90 Product Instruction Manual - Page 29
Storing the Machine, Replacing the Depth Wheel
View all Stihl FC 90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
N Fit the starter cover on the housing. N Tighten down the screws firmly. Storing the Machine For periods of 3 months or longer N Drain and clean the fuel tank in a well ventilated area. N Dispose of fuel properly in accordance with local environmental requirements. N Run the engine until the carburetor is dry - this helps prevent the carburetor diaphragms sticking together. N Thoroughly clean the machine - pay special attention to the cylinder fins and air filter. N Remove, clean and inspect the cutting blade. N Store the machine in a dry, high or locked location, out of the reach of children and other unauthorized persons. English Replacing the Depth Wheel Have a worn depth wheel replaced by a servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. Depth wheel 1 2 N The end of the thread on the screw (1) is caulked to ensure that the wingnut (2) does not work loose and be lost. A very high torque has to be applied to remove the wingnut from the screw. If the parts are then reassembled, the captive function is no longer guaranteed. In such a case have the screw and wingnut replaced by a servicing dealer. 241BA024 KN FC 90 27