Stihl HS 82 R Product Instruction Manual - Page 30

English Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours CARB The Emission Compliance Period used on the CARB-Air Index Label indicates the terms: Extended = 300 hours Intermediate = 125 hours Moderate = 50 hours Engine STIHL single cylinder two-stroke engine Displacement: Bore: Stroke: Engine power to ISO 7293: Idle speed: Cut-off speed: 22.7 cc (1.39 cu.in) 34 mm (1.34 in) 25 mm (0.98 in) 0.7 kW (0.9 bhp) at 8,500 rpm 2,800 rpm 9,300 rpm Ignition System Electronic magneto ignition Spark plug NGK CMR6H, (resistor type): BOSCH USR 4 AC Electrode gap: 0.5 mm (0.020 in) Fuel System All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 0.46 l (15.6 fl.oz) Weight complete with cutting attachment, dry, without blade scabbard HS 82 T 600 mm (24") blade: 5.1 kg (11.2 lbs) 750 mm (30") blade: 5.3 kg (11.7 lbs) HS 82 R 600 mm (24") blade: 5.4 kg (11.9 lbs) 750 mm (30") blade: 5.7 kg (12.6 lbs) Cutting Blade Sharpening angle to horizontal: 45° Maintenance and Repairs Users of this unit should carry out only the maintenance operations described in this manual. STIHL recommends that other repair work be performed only by authorized STIHL servicing dealers. Warranty claims following repairs can be accepted only if the repair has been performed by an authorized STIHL servicing dealer using genuine STIHL replacement parts. Genuine STIHL parts can be identified by the STIHL part number, the { logo and, in some cases, by the STIHL parts symbol K. The symbol may appear alone on small parts. 28 HS 82 R, HS 82 T