Stihl HT 105 Instruction Manual - Page 46

000BA073 KN English Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. Cutting attachments HT 134, HT 135 Rollomatic E Mini / Rollo Light 01 guide bars Reduced kickback STIHL guide bars (with green label) Bar lengths: 25, 30, 35 cm (10, 12, 14 in.) Pitch: 3/8" P (9.32 mm) Groove width: 1.1 mm (0.043 in.) Actual cutting length will be less than listed bar length. Saw chain 3/8" P Low kickback STIHL saw chain (with green label) Picco Micro Mini 3 (61 PMM3) Type 3610 Pitch: 3/8" P (9.32 mm) Drive link gauge: 1.1 mm (0.043 in.) Chain sprocket 7-tooth for 3/8" P Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. Maintenance and Repairs Disposal Users of this unit should carry out only the maintenance operations described in this manual. STIHL recommends that other repair work be performed only by authorized STIHL servicing dealers using genuine STIHL replacement parts. Genuine STIHL parts can be identified by the STIHL part number, the { logo and, in some cases, by the STIHL parts symbol K. The symbol may appear alone on small parts. For repairs of any component of this unit's air emissions control system, please refer to the air emissions systems warranty in this manual. Contact the local authorities or your STIHL servicing dealer for information on disposal. Improper disposal can be harmful to health and pollute the environment. N Take STIHL products including packaging to a suitable collection point for recycling in accordance with local regulations. N Do not dispose with domestic waste. 44 HT 105, HT 134, HT 135