Stihl MS 241 C-M Instruction Manual - Page 36

English When the mounting kit is used, the shutter must be in the winter position. If engine trouble occurs, first check whether use of the cover plate is necessary. Starting / Stopping the Engine Positions of the Master Control lever STOP Simultaneously pressing the throttle trigger lockout and blipping the throttle trigger causes the Master Control lever to jump from the Start } position to run F. Holding the chain saw There are two ways to hold the chain saw during starting. 0 219BA035 KN Stop 0 - engine off - ignition is switched off Run F - Engine running or can start Start } - this position is for starting the engine Adjusting the Master Control lever To adjust the Master Control lever from run F to start }, press and hold down the throttle trigger lockout and throttle trigger simultaneously - set Master Control lever to start } and simultaneously release the throttle trigger and throttle trigger lockout. 34 MS 241 C-M