Stihl MS 241 C-M Instruction Manual - Page 40

Oil Quantity Control, Taking Care of the Guide Bar

Get Stihl MS 241 C-M PDF manuals and user guides View all Stihl MS 241 C-M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

English Long-term storage See "Storing the machine" Oil Quantity Control Varying cutting lengths, types of wood and work techniques require varying amounts of oil. Taking Care of the Guide Bar 2 001BA157 KN 143BA026 KN 1 The oil flow can be adjusted as needed using the adjusting screw (1) (on the bottom of the machine). Ematic position (E), medium oil flow - N Turn adjusting screw to E (Ematic position) To increase oil flow - N turn the adjusting screw clockwise To reduce oil flow - N turn the adjusting screw counterclockwise NOTICE The saw chain must always be coated with oil. 1 3 N Turn the guide bar over - every time you sharpen the chain and every time you replace the chain - this helps avoid one-sided wear, especially at the nose and underside of the bar. N Regularly clean the oil inlet hole (1), the oilway (2) and the bar groove (3). N Measure the groove depth - with the scale on the filing gauge (special accessory) - in the area used most for cutting. 38 MS 241 C-M

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
MS 241 C-M
English
38
Long-term storage
See "Storing the machine"
Varying cutting lengths, types of wood
and work techniques require varying
amounts of oil.
The oil flow can be adjusted as needed
using the adjusting screw (1) (on the
bottom of the machine).
Ematic position (
E
), medium oil flow –
N
Turn adjusting screw to
E
(Ematic
position)
To increase oil flow –
N
turn the adjusting screw clockwise
To reduce oil flow –
N
turn the adjusting screw
counterclockwise
NOTICE
The saw chain must always be coated
with oil.
N
Turn the guide bar over – every time
you sharpen the chain and every
time you replace the chain –
this
helps avoid one-sided wear,
especially at the nose and
underside of the bar.
N
Regularly clean the oil inlet hole (1),
the oilway (2) and the bar groove
(3).
N
Measure the groove depth – with the
scale on the filing gauge (special
accessory) – in the area used most
for cutting.
Oil Quantity Control
001BA157 KN
1
Taking Care of the Guide Bar
2
3
1
143BA026 KN