Sub-Zero 700BCI Sub-Zero Design Guide - Page 13
Built-In Refrigeration, Framed Panels
View all Sub-Zero 700BCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Built-In Refrigeration 13 subzero.com/specs Framed Panels If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the total thickness to 1/4" (6). If the panel is thicker than 1/4" (6), a routed edge must be provided around the panel to ensure a proper fit. Refer to the illustrations. IMPORTANT NOTE: For framed design applications, routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale templates at the end of this section. IMPORTANT NOTE: Do not cover a glass door with a solid panel. Also, the edges of the window cut-out will need to be finished, as they will be exposed. IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30-31 for dual standard installations. Be aware that rough opening dimensions are different for this application. TRIM REVEAL 1/4" (6) min 1/4" (6) PANEL MAIN FRAME DOOR TRIM REVEAL 1/4" (6) min ROUT TO 1/4" (6) MAIN FRAME DOOR Panels 1/4" (6) thick or less. Panels thicker than 1/4" (6).