Sub-Zero 700BCI Sub-Zero Design Guide - Page 80
Wine Storage, Handle Hardware, Side Panels
View all Sub-Zero 700BCI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Wine Storage 80 Side Panels MODEL WS-30 When planning for side panels with the installation of the model WS-30, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using, the height of the panel may vary. IMPORTANT NOTE: The use of side panels may change the width of your rough opening. When installing a model WS-30 with a custom side panel, an accessory kit is required. Stainless steel side panels are also available through your authorized Sub-Zero dealer. The side panel will need to be a minimum of 24" (610) deep and 1/2" (13) thick. Refer to the illustrations below for side panel dimensions. Routing will be necessary so that the side panel fits flush against the side of the unit. Handle Hardware For overlay and integrated models, handle hardware must be provided. Optional stainless steel tubular and pro handles are available through your authorized Sub-Zero dealer. The door frame has numerous mounting holes on each side to accommodate handle hardware. Using the predrilled holes to attach the handle will provide the best alignment and strength. IMPORTANT NOTE: Refer to the full-scale template at the end of this section for a profile of the door frame and position of the glass. Do not drill through the glass. 24" (610) FRONT OF SIDE PANEL 1" (25) 17/8" (48) ROUT TO 1/8" (3) 17/8"(48) 1" (25) 84" (2134) 1/8" (3) 1/2" (13) MAIN SIDE PANEL FRAME ROUTING Routing detail. 4" (102) OPTIONAL TOE KICK CUT-OUT 2 5/8" (67) Side panel dimensions.