Sub-Zero 700BCI Integrated Use & Care Guide - Page 18

Integrated Use & Care 18 Cleaning INTERIOR CLEANING It is necessary to keep your integrated unit clean to ensure smooth operation and keep food safe. Wipe up any spills immediately. To clean interior surfaces and removable parts, wash with a mild solution of soap and lukewarm water with a little baking soda. Do not use vinegar or alcohol-based cleaners. Rinse and dry thoroughly. Avoid getting water on the lights and control panel. Do not use abrasive cleaners, as these may scratch interior surfaces. Do not use hot water to clean glass shelves until they have come to room temperature. Extreme temperature may cause the glass to break. STAINLESS STEEL EXTERIOR To clean the exterior of a stainless steel model, use a soft, nonabrasive stainless steel cleaner like Signature polish and apply with a soft lint-free cloth. Signature polish is available from Signature Limited Laboratory, P. O. Box 13436, Dayton, Ohio 45413, or call 877-376-5474. To bring out the natural luster of the stainless steel, lightly wipe the surface with a water-dampened microfiber cloth followed by a dry polishing chamois. All work should follow the grain direction of the finish. Better results are obtained by keeping the cloth in continuous contact with the stainless steel. Do not use a metallic or highly abrasive cleaner or cloth, as this will scratch the stainless steel finish.