Sub-Zero 700TFI Integrated Installation Guide - Page 16

Integrated Installation 16 Panel Considerations DOOR PANEL HEIGHT The height of the door panel can extend beyond the typical panel height, provided you do not exceed the panel weight limit. A minimum finished height of 80" (2032) is required for 27" (686) and 36" (914) tall models. For the 27" (686) integrated column, a minimum finished height of 81" (2057) is required. Therefore, when installing a tall model next to a column, the minimum finished height is 81" (2057). For installations taller than 80" (2032) or 81" (2057), a decorative valance will be needed to finish off the height to the finished surrounding cabinetry. The illustration below shows how the panel may be extended and what you need to consider to finish the area behind the door panel. IMPORTANT NOTE: The decorative valance used to finish the area behind the door panel must stay behind the front plane of the finished molding. 1/8" (3) OVERALL HEIGHT 1/8" (3) MINIMUM HEIGHT TYPICAL HEIGHT OF DOOR PANEL 11/2" (38) DOOR PANEL 25" (635) TO WALL DECORATIVE VALANCE CANNOT EXTEND BEYOND THE FRONT OF THE MOLDING DECORATIVE VALANCE HINGE REMOVABLE MOLDING INTEGRATED UNIT (SIDE VIEW) TOE KICK CLEARANCE The toe kick clearance can vary with the height of the panel. You must keep a minimum space of 4" (102) clear below the bottom edge of the panel for proper venting. In addition, any decorative base molding must be removable and cannot exceed 4" (102) in height. INTEGRATED UNIT (SIDE VIEW) HEIGHT OF PANEL 4" (102) TO 9" (229) FROM FLOOR BASE MOLDING MUST BE REMOVABLE- 4" (102) MAX HEIGHT KICKPLATE / GRILLE CAN BE ADJUSTED FORWARD KICKPLATE / GRILLE 25" (635) TO WALL 2 5/8" (67) TO 4" (102) Kickplate/grille area. Upper valence.