Sub-Zero BI-42UFD Built-In Use & Care Guide - Page 7
Freezer Storage - bi 42sd
View all Sub-Zero BI-42UFD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
STORAGE Freezer Storage FREEZER BASKETS BI‑36F and side-by-side models | To remove, pull forward until basket stops. Pull the two metal clips located behind the bottom two corners of the basket forward, then lift up and out. Refer to the illustration below. To reinstall, push drawer slides in. Align the basket with slides and push back until it stops. Press down on the front of the basket to engage slides. IMPORTANT NOTE: To remove for models BI-36S, BI-42S, BI-42SID and BI-42SD, the basket must be raised and pulled through the opening in the door liner after disengaging. Over-and-under models | To remove the upper and lower freezer baskets, lift up and out. Refer to the illustration below. To reinstall, insert the lower basket into the four corner retainers. Position the upper basket onto the side rails and slide back until it clicks. ICE CONTAINER BI‑36F and over-and-under models | To remove, pull container forward until it stops, then lift out. Side-by-side models | To remove, pull container forward until it stops, then lift to clear the carrier assembly along the back. Pull forward and out. Refer to the illustration below. Dispenser models | To remove, pull container out partially, then rotate and pull out. Refer to the illustration below. Side-by-side models. Dispenser models. BI‑36F and side-by-side models. Over-and-under models. subzero.com | 7