Sub-Zero IT-30CIID Integrated Use & Care Guide - Page 7
Refrigerator Storage
View all Sub-Zero IT-30CIID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
STORAGE Refrigerator Storage GLASS SHELVES To remove or adjust a glass shelf, tilt up, then lift up and out. To reposition, insert shelf in the tracks along the back wall, then lower the front until it locks into position. Refer to the illustration below. The stationary glass shelf at the bottom of the compartment should be placed with beveled edge facing front. Rear support legs space the shelf away from the back wall to ensure proper air flow through the unit. IMPORTANT NOTE: Use care when handling glass shelves to prevent breakage or scratching the interior. CAUTION Glass shelves should warm to room temperature before immersing in warm water. REFRIGERATOR DRAWERS To remove a refrigerator drawer, pull open until the drawer stops. Lift the front of the drawer slightly and pull straight out. To reinstall, pull drawer carrier out and align the bottom of the drawer with the carrier. Refer to the illustration below. Dividers in refrigerator drawers can be removed by pulling straight up. To replace, align tabs on the divider with notches in the drawer and push down. Refrigerator drawer removal. Glass shelf removal. subzero.com | 7