Symphonic CD10 Owner's Manual - Page 16

Troubleshooting, Guide

Page 16 highlights

TROUBLESHOOTING GUIDE If you do have a problem, try the suggested remedy in the chart below before bringing this unit to our authorized service facility for assistance. Problem Possible Cause Disc tray does not come out when OPEN/CLOSE button is pressed. * Power plug is disconnected from outlet. * Power switch is OFF. When playback is started, it stops immediately. Paused or stops during playback. * Disc is loaded upside down. * Smudges on the disc, etc. No sound. * Audio cables are connected incorrectly. Sound is distorted. A particular spot on the disc does not play correctly. Sound cuts out, or same spot is repeated.. Remote control will not function. * Connections to amplifier are wrong. * Amplifier volume is set too high and sound is being clipped. * Disc is dirty. * Defective disc. * Dead batteries. * Too far from player or wrong angle. * Obstruction between player and remote control unit. Remedy * Insert the power plug into the power outlet securely. * Press Power switch ON. * Load the disc with the label side up. * Carefully clean the surface of the disc. * Connect the audio cables to the output terminals of the player and the input terminals of the amplifier. * Connect player to proper amplifier inputs. * Turn down the amplifier output volume. * Clean the surface of the disc. * Replace disc. * Replace batteries. * The distance between remote control unit and player should be no more than about 20 feet (6 meters). * Relocate remote control unit or remove obstruction. -16-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

TROUBLESHOOTING
GUIDE
If
you
do
have
a
problem,
try
the
suggested
remedy
in
the
chart
below
before
bringing
this
unit
to
our
authorized
service
facility
for
assistance.
Problem
Possible
Cause
Remedy
Disc
tray
does
not
come
out
when
OPEN/CLOSE
button
is
pressed.
*
Power
plug
is
disconnected
from
outlet.
*
Insert
the
power
plug
into
the
power
outlet
securely.
*
Power
switch
is
OFF.
*
Press
Power
switch
ON.
When
playback
is
started,
it
stops
immediately.
Paused
or
stops
during
playback.
*
Disc
is
loaded
upside
down.
*
Load
the
disc
with
the
label
side
up.
*
Smudges
on
the
disc,
etc.
*
Carefully
clean
the
surface
of
the
disc.
No
sound.
*
Audio
cables
are
connected
incorrectly.
*
Connect
the
audio
cables
to
the
output
terminals
of
the
player
and
the
input
terminals
of
the
amplifier.
Sound
is
distorted.
*
Connections
to
amplifier
are
wrong.
*
Connect
player
to
proper
amplifier
inputs.
*
Amplifier
volume
is
set
too
high
and
sound
is
being
clipped.
*
Turn
down
the
amplifier
output
volume.
A
particular
spot
on
the
disc
does
not
play
correctly.
Sound
cuts
out,
or
same
spot
is
repeated..
*
Disc
is
dirty.
*
Clean
the
surface
of
the
disc.
*
Defective
disc.
*
Replace
disc.
Remote
control
will
not
function.
*
Dead
batteries.
*
Replace
batteries.
*
Too
far
from
player
or
wrong
angle.
*
The
distance
between
remote
control
unit
and
player
should
be
no
more
than
about
20
feet
(6
meters).
*
Obstruction
between
player
and
remote
control
unit.
*
Relocate
remote
control
unit
or
remove
obstruction.
-16-