Symphonic CD1100 Owner's Manual - Page 11

MAINTENANCE CLEANING NEVER use scouring pads, steel wool, scouring powders, or harsh chemical agents, such as ►ye solution. These will mar the finish. Clean with a soft, lint-free cloth or cotton swab slightly dampened with a mild solution of detergent and water. REPAIRS Only the most competent and qualified technicans should he allowed to service your Compact Disc Player. The Symphonic Corporation and its factory trained technicians have the knowledge and special equipment needed for repair and calibration of this precision instrument. When delivering the product for service, you should take a copy of your purchase receipt and a full description of the problems you have encountered. SPECIFICATIONS 1. AUDIO 1) Number of channel: 2) Frequency response: 3) Signal-to-Noise ratio: 4) Harmonic distortion: 5) Total Harmonic Distortion: 6) Channel separation: 7) Output voltage: 8) Wow and Flutter: Stereo (2) 20 - 20,000Hz ± 0.7dB 94dB (J1S-A) 0.008% (at lkHz) (30kHz L.P. Filter) 0.01% (at 1kHz) (Flat) 82dB (at 1kHz) (With B.P. Filter) 1.8V (at 1kHz) Less than Unmcasurable Litmit 2. SYSTEM 1) Pick up: 2) Error correction: 3) D/A converter: 4) Filter: 5) Disc loading: 6) Random memory: 7) Sampling frequency: 3 beam laser pick up, Wave length 790nm CIRC Double error correction High speed 16 bit linear Digital filter & Analog 2-pole filter Drawer type, horizontal loading Random program memory max. 15 44.1kHz 3. TERMINALS 1) Output: 2) AC input: 2P RCA jack (Stereo) SPT-1 cord (black) with 2 pin plug 4. MECHANICAL 1) Unit size (WxHxD): 2) Net weight: 3) Packed size (WxHxD): 4) Gross weight: 16-9/16"x3-1/8"x9-15/16" (420x80x253mm) 6.92 lbs. (3.1 kg) 19-1/2"x6-23/32"x14-3/8" (495 x 170 x 365mm) 9.47 lbs. (4.3 kg) 5. GENERAL 1) Power requirement: 2) Power consumption: AC 120V 60Hz 12W * The above specifications are based on the nominal value. Design and specifications are subject to possible modification without notice for performance improvement. -11-