Symphonic SC3913V Owner's Manual - Page 24
Recordin
View all Symphonic SC3913V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
RECORDIN( Make sure ... • TVNCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING You can ONLY watch the same TV program that is being recorded. Select the channel to be CH 10 recorded Press the number buttons on the remote control or the CHANNEL ♦ or A button. Remember: If the TVNCR is connected to a cable box or satellite box, the TVNCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box. SKIPPING UNWANTED SCENES DURING RECORDING Press the PAUSE/STILL button to temporarily stop recording. Press the PAUSE/STILL or RECORD button to resume recording. NOTES: • After five minutes, the TVNCR will automatically switch to the Recording mode to prevent tape damage. • If "CLOSED CAPTION (ON)" is selected, the OnScreen Display will appear for 5 seconds, then disappear. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). 3 Begin recording Press the RECORD button. 4 Stop recording Press the STOP button when recording is completed. - 24 - EN 9F07