Symphonic SL2940 Owner's Manual - Page 17

PLAYBACK NORMAL PLAYBACK PICTURE SEARCH • Be sure to check that the POWER and the VCR/TV indicators are both on. • Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV. CH3 CH4 [Back of the VCR] 1 Insert a prerecorded tape Counter mode appears at 0:00:00 on the TV screen. If the erase-protection tab has been removed, the VCR will start playback automatically. AMOMMIMUNMOMM 2 To begin playback PLAY P. Press the PLAY button. NOTE: If any menu is activated on the TV screen, the PLAY button on the remote control does not function. Press the RESET/EXIT button to clear the menu. Then, press the PLAY button. This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1) You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes) 2) Press it again and the VCR will now search in super high speed. (in the LP / SLP modes only) 3) Press the PLAY button to return to normal speed. STILL PICTURE You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Press the PLAY button to return to playback. • You can advance the picture by one frame at a time by pressing the PAUSE/STILL button during the still mode. • If it is left in the Still mode for more than five minutes, the VCR will automatically switch to the Stop mode. If a tape is already in the VCR with power off 2A) Using button on the VCR Just press the PLAY button on the VCR. Power will automatically turn on and playback will start. (Direct Button Operation) 281 Using button on the remote control Press the POWER button to turn on the VCR, and then press the PLAY button on the remote control. 3 To stop playback Press the STOP button. - 17 - EN 8H28