Symphonic SL2940 Owner's Manual - Page 26
Timer, Program, Extension, Return
View all Symphonic SL2940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
TIMER PROGRAM EXTENSION To shift the time schedule of a One Time Program. 1) Turn the power on. Then, press the MENU button. 2) Select the program number which you want to shift for- ward using the PLAY/A or STOP/V button. The details of the selected program appears on the TV screen. 3) Press the RECORD button on the remote control when a program number is blinking. Each additional push will shift forward the start/end time for recording by 10 minutes. It can be shift forward for up to 24 hours. TO CANCEL OR CHECK THE START/END TIME 1) Turn the power on. Then, press the MENU button. 2) Select the program number which you want to check using the PLAY/A or STOP/V button. The details of the selected program appears on the TV screen. You may cancel the entire program by pressing the REW/1 button. 3) Press the RESET/EXIT button to return to original mode. AUTO RETURN When the recording is already in progress, each additional push will shift forward the end time for recording by 10 minutes. It can shift forward up to 23:50 from the start time. In this case, the recording speed will automatically be set to SLP mode. If you want to cancel while the setting, press the PAUSE/STILL button on the remote control. The recording time returns to the original time. 4) Press the RESET/EXIT button to exit the setting menu. NOTES: • You can shift the time schedule of a One Time Program only. • When you press the PAUSE/STILL button to cancel the setting while the recording is already in progress, the recording speed will stay in SLP mode. When all the timer recordings are completed (the TIMER indicator on the VCR flashes), the VCR will rewind to the beginning of the first recorded program(s) automatically. MANUAL OPERATION Press the AUTO RETURN button on the VCR first when all the timer recordings are completed. The VCR will automatically turn on and rewind the tape. • If you press any tape function button before pressing the AUTO RETURN button, auto return will not function. AUTOMATICALLY OPERATION (from the menu) 1) Press the POWER button to turn on the VCR. 2) Press the MENU button repeatedly so that the VCR SET UP menu appears. TO CORRECT AN AUTOMATIC TIMER PROGRAM 1) Turn the power on. 2) Repeat steps [1] to [3] on page 24. 3) Go to the digit you want to change by using the F.FWD/10- button or REW/All button. 4) Enter correct numbers by using the PLAY/A or STOP/V button. 5) Press the RESET/EXIT button to return to original mode. 6) Press the POWER button to return to timer stand-by mode. TO STOP A STARTED AUTOMATIC TIMER PROGRAM Press the STOP/EJECT button on the VCR. 3) Press the PLAY/A or STOP/V button to point to "AUTO RETURN". 4) Press the F.FWD/110- button so that [AUTO] appears next to "AUTO RETURN". VCR SET UP SATELLITE LINK AUTO REPEAT RENTAL • AUTO RETURN [AUTO] To cancel the auto return programming, press the F.FWIDA10button so that [AUTO] disappears from the menu. 5) Press the RESET/EXIT button to return to original mode. NOTE: If there are any remaining programs for Once, Daily and Weekly, or an Auto Satellite Link recording, this function will not activate. If you program multiple timer recordings and you want to activate the auto return when only some of those are finished, press the POWER button to turn on the VCR then press the AUTO RETURN button. The VCR will rewind to the beginning of those programs. NOTE: The STOP button on the remote control will not function in Automatic Timer Recording mode. WATCH THE RECORDED PROGRAM Press the POWER button to turn on the VCR. Then, press the PLAY button. - 26 - EN 8H28