Symphonic SL2940 Owner's Manual - Page 25
Hints, Timer, Recording
View all Symphonic SL2940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
• When you press the F.FWD/0- button during steps [4] to [10], you may move to the next step. • Press the REW/l button to go back one step from the current step during steps [2] to [10]. 4 Set the date when you want to start First, press the PLAY/A or STOP/V button until the desired month appears. (Example: "05" for May) Then, press the F.FWD/1110- button. ONE TIME PROGRAM PROGRAM NUMIIER DATE Oi II6HU START TIME - END TIME--:-- -- CHANNEL - - RED SPEED - - Next, press the PLAY/A or STOP/V button until the desired day appears, and then press the F.FWD40- button. (Example: "06" for 6th) MAN 5 Set the start hour Press the PLAY/A or STOP/V button until the desired hour appears. (Example: 07) PROGRAM 'THU ONE TIME PROGRAM START -rinar. 0 7 IN. -- gND ATI NNETIM" r -- SEC SPEED -- Then, press the F.FWD/110. button. WIIIM.WMAMMWdMON. 6 Set the start minute Press the PLAY/A or STOP/V button until the desired minute appears. (Example: 30) Then, press the F.FWD/Ilo button. ONE TIME PROGRAM PROGRAM NUMBER DATE 05/08 WC" START TIME 0 7:3 08.8.1, M,m• END TIME - - t•to CHANNEL - - SEC SPEED -- AM Next, press the PLAY/A or STOP/V button to point to "AM" or "PM". (Example: PM) Then, press the F.FWD/110- button. 7 Set the end hour Press the PLAY/A or STOP/V button until the desired hour appears. (Example: 08) Then, press the F.FWD/10.- button. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 00/06 THU START TIMI't104.3 0 PM "-IF% END TIMM 0R - - - CHANNEL RED SPEED - 8 Set the end minute Press the PLAY/A or STOP/V button until the desired minute appears. (Example: 30) Then, press the F.FWD/110. button. ONE TIME PROGRAM PROGRAM NUMBER I DATE 05/06 TV START TIME 07:30 *MI END TIME --:34 e me CHANNEL -- RED SPEED -- AM Next, press the PLAY/A or STOP/V button to point to "AM" or "PM". (Example: PM) Then, press the F.FWINI/ button. 9 Set the channel number Press the PLAY/A or STOP/V button until the desired channel number appears. (Example: 16) Then, press the F.FWD/110- button. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 05/06 THU START TIME 0 7 • 3 0 PM END TIMIN,06415 PM CHANNEL= I 6Ns REC SPEEDO-IN • Remember refer to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 if you have a cable boxorsatellite box beforesettingthechannelnumber. 10 Set the tape speed Press the PLAY/A or STOP/V button until the desired tape speed appears. (Example: SP) ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 05/06 THU START TIME 0 3 0 PM _ END 7HIMINVAVV 8i ° REC SPEEN.SSPP .8.6 PM 11 Finish setting the program Press the F.FW1D/1 button. Program 1 is now completed. • To set another program, repeat steps [2] to [11]. • Press the RESET/EXIT button to return to original mode. 12 Set the timer Press the POWER button to turn off. The TIMER indicator on the VCR comes on. • Please see "HINTS FOR TIMER RECORDING" on page 25 for more information. HINTS FOR TIMER RECORDING • If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The TIMER indicator will flash. • If a tape is not in the VCR or does not have the eraseprotection tab, the TIMER indicator flashes and timer recording cannot be performed. Please insert a recordable tape. • The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the timer-record mode. - 25 - EN 8H28