Symphonic SV206G Owner's Manual - Page 9
Audio/video
View all Symphonic SV206G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
SETTING A VIDEO CHANNEL All TERMINALS If your TV does not have A/V terminals; When the VCP is in the Playback mode, your TV will receive the signals from the VCP on either channel 3 or 4. To use the VCP with your TV, set the selector switch to CH3 or CH4, whichever is not used or least used for normal broadcasts in your area. Then set your TV to that same channel. If your TV has A/V input jacks, you may connect the VCP's AUDIO/VIDEO OUTPUT jacks to the audio/video input jacks on back of your TV. Direct audio/video connections usually result in a better picture and sound quality for tape playback. Please see your TV's owner's manual for A/V input connections. AudioNideo "V" adapter cord [Back of the VCP] (not supplied) AUDIO H - CH3 CH4 ANT Olff AMIN OUTPUT VIDEO [AN television] ENSTALIAN( THE "TERIES INOo 0 L R 0 0 L AUDIO-1 0 VIDEO 1) Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3) Replace the cover. C e 0 e - 9 - EN 7C04