Symphonic TRWF130 Owner's Manual - Page 24
Recording, Normal, Skipping, Unwantedi., Scenes, During
![]() |
View all Symphonic TRWF130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
RECORDING Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING You can ONLY watch the same TV program that is being recorded. 1 Select the channel to be recorded Press the number buttons on the CH 10 remote control or the CHANNEL A or button. Remember: If the TV/VCR is con- nected to a cable box or satellite box, the TV/VCR must be on CH3 or CI-14, then the channel to be recorded must be selected on the cable box or satellite box. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). SKIPPING UNWANTEDi. SCENES DURING RECORDING Press the PAUSE/STILL button to temporarily stop recording. Press the PAUSE/STILL or RECORD button to resume recording. NOTES: • After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage. • If "CLOSED CAPTION (ON)" is selected, the OnScreen Display will appear for 5 seconds, then disappear. 3 Begin recording Press the RECORD button. 4 Stop recording Press the STOP button when recording is completed. - 24 - EN 9103
![](/manual_guide/products/symphonic-trwf130-owners-manual-ddafda6/24.png)