Symphonic TRWF130 Owner's Manual - Page 26

TIC TIME ORDING You may set the TV/VCR to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. And press the F.FWD/I0- button. • If you have not yet set.the clock, "MANUAL CLOCK SET" appears. If so, follow stops [3] to [8] on page 15. Then set the timer recording. -MENU- ▪ TIMER PROGRAMMING PICTURE CONTROL SETT sVG GIGO< CHANNEL SET UP USERS SET UP CHIP SET UP LANGUAGE IENGMSNI CAPTION IOFIT ZERO RETURN TIME SEARCH In the example below, the timer is being set to record: DATE: July 6th, 2000 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP 2 Select your desired program position (1-8) Press the PLAY/A or STOP/v but- - TIMERPROGRAMMING - ton to select the desired program al DATE BEGIN Els0 position. Then, press the F.FWD/1100. button. Make sure ... • If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. • Clock must be set to the correct time and date before setting the timer. • TV/VCR power must be turn on to program it. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) • The channel you want to record is properly set in advance. (See page 13.) Avoid over lap of programs ... There is a chance that a program will not be record- ed. when programs overlap; • The program with an earlier start has priority. • Once the earliest program finishes, the overlapping programs will begin recording in sequence. • The illustration below demonstrates the sequence of recordings. Program 1 10:00AM - H :00AM Prpgram 2 9:00AM - 10:00AM Program 3 9:30AM - 12:00PM 3 Set the channel number Press the PLAY/A or STOP/V but- - TIMER PROGRAMMING a1 DATE Ma at, ton until the desired channel num- ber appears. (Example: CH61) Then, press the F.FWD/1/•• button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CI-13 or O-14, then the channel to he recorded is selected on the cable box or satellite box. 460.8MS6 4 Select once, every day or weekly recording For once recording : Press the PLAY/A (up) button until the desired date appears. - TIMER PROGRAMMING CH DATE BEGIN ED (Example: "7/06" for July 6th). Then, press the F.FWD/0- but- ton. For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) Press the STOP/v (down) button until "EVRY DAY" appears. Then, press the F.FWD/10- button. - TIMER PROGRAMMING CH DATE BEGIN ENO :;:: Recording Sequence Program 1 10:OOAM-11:OOAM Program 2 9:OOAM-10:OOAM Program 3 9:30AM-12:OOPM , se" '11 I 9:OOAM 10,00011 11,00AM 12:00PM 'Recordingpenrodis SHADED 1 Select "TIMER PROGRAMMING'' Press the MENU button on the remote control. Confirm "TIMER PROGRAMMING" is pointed by pressing the PLAY/A button. For weekly recording : To record a TV program at the same time on the same channel every week. (Example: every Monday) Press the STOP/V (down) button until "EVRY" and your desired day of the week appear together. Then, press the F.FWD/O. button. - TIMER PROGRAMMING CH DATE BEGIN CND co- EARS .." 3- '3 - 26 - EN 9103