Symphonic WF319E Owner's Manual - Page 11

In the example below, the clock is to be set to: DATE May 6th, 2004 SETTING TIME 5:40PM 1 Select "SETTING CLOCK" Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to "SETTING CLOCK". Then, press the F.FWD/B button. - M E N U - TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH 2 Select "MANUAL CLOCK SET" Press the PLAY/K or STOP/L - SETTING CLOCK - button to point to "MANUAL CLOCK SET". Then, press the F.FWD/B button. AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] B MANUAL CLOCK SET D.S.T. [OFF] 3 Select the month Press the PLAY/K or STOP/L button until your desired month appears. (Example: May → 05) Then, press the F.FWD/B button. - MANUAL CLOCK SET - MONTH DAY YEAR 05 HOUR MINUTE -- : -- -- 4 Select the day Press the PLAY/K or STOP/L button until your desired day appears. (Example: 6th → 06) Then, press the F.FWD/B button. - MANUAL CLOCK SET - MONTH DAY YEAR 05 / 06 --- ---- HOUR MINUTE -- : -- -- 5 Select the year Press the PLAY/K or STOP/L button until your desired year appears. (Example: 2004) Then, press the F.FWD/B button. - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 HOUR MINUTE -- : -- -- 6 Select the hour Press the PLAY/K or STOP/L button until your desired hour appears. (Example: 5, PM) Then, press the F.FWD/B button. - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 HOUR MINUTE 0 5 : - - PM 7 Select the minute Press the PLAY/K or STOP/L button until the desired minute appears. (Example: 40) - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 THU 2 0 0 4 HOUR MINUTE 0 5 : 4 0 PM 8 Start the clock Press the MENU button on the remote control. 5:40 PM Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. TO CHANGE CLOCK SETTING If you want to change the clock, 1)Follow steps [1] and [2]. 2)Select where you want to change using the F.FWD/B or REW/s button. 3)Enter correct numbers using the PLAY/K or STOP/L button. 4)Press the MENU button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock. AUTOMATIC CLOCK SETTING Make sure ... • The TV/VCR is turned on. • Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR. NOTE: • If a cable converter box is being used, make sure it is powered on. • You must use the TV/VCR remote control to per- form the clock setting procedure. • If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. - 11 - EN 9I03