Symphonic WF319E Owner's Manual - Page 12

1 Select "SETTING CLOCK" Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select "SETTING CLOCK". Press the F.FWD/B button to enter "SETTING CLOCK" menu. - M E N U - TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH 2 Set "AUTO CLOCK" to [ON] Press the F.FWD/B button until "AUTO CLOCK [ON]" appears. - SETTING CLOCK - B AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] 3 Begin "AUTO CLOCK CH SEARCH" Press the STOP/L button to select "AUTO CLOCK CH SEARCH". Press the F.FWD/B button. • The TV/VCR is now searching for the station which contain the - SETTING CLOCK - AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET D.S.T. [OFF] auto clock set signal. The search for a signal may take up to 20 seconds per channel. • "_ _" appears at the lower left of - AUTO CLOCK CH SEARCH - the screen when the search has 08 10 13 ended. • Auto Clock station- write down the number(s) that appear on the __ screen. These are the auto clock station(s) in your area. See item 4 below. • If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 11. Press the MENU button to exit the screen. NOTE: During Auto Clock CH Search, the picture may be distorted. This is normal. 4 Enter the channel number that contains the Automatic Clock Setting Signal Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select "SETTING CLOCK". Press the F.FWD/B button to enter "SETTING CLOCK" menu. Press the STOP/L button to select "AUTO CLOCK CH". Press the F.FWD/B or REW/s buttons until you locate Auto Clock Set station number. See item 3 above. - M E N U - TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH - SETTING CLOCK - AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [ 45] MANUAL CLOCK SET D.S.T. [OFF] Press the MENU button to exit the screen. 5 Turn off the TV/VCR Once the TV/VCR is turned off , it will periodically check and set the correct date and time. DAYLIGHT-SAVING TIME Select this feature and the TV/VCR's clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: • First Sunday of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record. • Last Sunday of October : At 2 AM the clock immediately changes to 1 AM. Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select "SETTING CLOCK" Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to "SETTING CLOCK". Then, press the F.FWD/B button. - M E N U - TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH 2 Set "D.S.T." (Daylight-Saving Time) to [ON] Press the PLAY/K or STOP/L button to point to "D.S.T.". Then, press the F.FWD/B or REW/s button until [ON] appears. - SETTING CLOCK - AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] MANUAL CLOCK SET B D.S.T. [ON] 3 Exit the Daylight-Saving Time mode Press the MENU button on the remote control to return to TV mode. TO CANCEL THE DAYLIGHT-SAVING TIME Repeat steps [1] to [2], select [OFF] using the F.FWD/B or REW/s button. - 12 - EN 9I03