TASCAM BD-MP1 Owners Manual - Page 12
Rear panel, Button combinations and the unit's behavior
![]() |
View all TASCAM BD-MP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Button combinations and the unit's behavior Button combination SHIFT - SHIFT 8 SHIFT y SHIFT 9 SHIFT m SHIFT , y 8 Button press Simultaneous press Simultaneous press Simultaneous press Simultaneous press Simultaneous press Simultaneous press Simultaneous press Behavior Changes the LOCK setting. Confirms or selects menu items. j (down) k (up) l (left) ; (right) Displays the HOME screen. y 9 Simultaneous press Displays the top menu/title menu of the disc. y m Simultaneous press Selects repeat modes. y , Simultaneous press Plays back a defined section between point A and B repeatedly. Rear panel er t yu i o p a e ANALOG OUT (BALANCED) L/R jacks These are balanced XLR analog output jacks. These transmit audio signals to external speakers and amplifiers, for example. Use XLR cables for connection. r ANALOG OUT (UNBALANCED) L/R jacks These are unbalanced RCA analog output jacks. These transmit audio signals to external speakers and amplifiers, for example. Use RCA cables for connection. t 7.1 audio out (unbalanced) jacks These are 7.1 unbalanced RCA analog output jacks. These transmit 8 channels of audio signals to a 7.1 surround system. Use RCA cables for connection. y DIGITAL OUT (COAXIAL) connector This is a coaxial digital audio output connector. This transmits digital audio signals to a television. Use a coaxial cable (75Ω) for connection. u HDMI OUT port Audio/video signals are transmitted from the HDMI port. Use an HDMI cable for connection. i USB port Connect/disconnect USB flash drives here. Audio, video and other files can be played back from a connected USB flash drive. Moreover, this can be used to load update files for firmware updates. o ETHERNET connector This is an Ethernet port. Use to connect this unit to a network and to control it from a computer. Moreover, BD-Live contents can also be accessed with an Internet connection. Use an STP cable that is category 5e or higher for connection. p RS-232C connector This is a 9-pin D-sub RS-232C control input/output connector. A computer can be used to control this unit by connecting to it with an RS-232C cable. a AC IN connector Connect the included power cord here. VCAUTION Always use the included cord to supply power to this unit. Use of a different one could cause malfunction, fire or electric shock. 12 TASCAM BD-MP1
![](/manual_guide/products/tascam-bdmp1-owners-manual-4459d7a/12.png)