TASCAM CD-D17HD Owners Manual - Page 17

Loading Data to and Copying from the Hard Disk Source Drive Loading Data to and Copying from the Hard Disk Source Drive Note: The following instructions apply only to the TASCAM CD-D17HD Tower CD Duplicator. During initialization (see Step 3 on page 7), the CD Duplicator performs a selftest to detect source drives. The CD-ROM drive and hard disk drive will be detected as available source drives. The CD-ROM drive is the default source drive. The internal hard disk drive was formatted and partitioned at the factory. Each partition occupies 1GB of hard disk space. The number of partitions depends on the capacity of the hard disk drive. Partitions are arranged alphabetically and initially contain no data. A set of data loaded into a partition on the hard disk drive is called an "image file." To use the hard disk drive as the source drive, you must first load an image file from a CD onto a partition on the hard disk drive, select the partition that contains the data you want to copy, specify the hard disk drive as the source drive, then execute the copy function. 1. Insert a source CD into the CD-ROM drive. This disc (CD-ROM, CD-R, or CD-RW) contains the data that you wish to copy to the partition on the internal hard disk drive. 2. Press the / buttons to select function menu [9 Image], then press the (ENT) button. The Image menu includes the Load, Delete Image, Image Info, Compare Image, Select Image and Select Src Drive functions. 3. Press the press the / buttons to select function [9-5 Select Image], then (ENT) button to access the Select a Partition submenu. The Select a Partition submenu enables you to select a partition (A, B, C, etc.) into which to load an image file on the hard disk drive. (When the unit is shipped from the factory, the partitions on the hard disk drive contain no data.) The LCD will display a message similar to the following for each corresponding partition: Select a Partition No image in A TASCAM Tower CD Duplicator User's Manual 9