TASCAM CD-D17HD Owners Manual - Page 29

12.7 Update Firmware

TASCAM Tower CD Duplicator User’s Manual

21

12.7 Update Firmware

The

Update Firmware

function updates the firmware of the interface board via

compact disc (CD). The CD must contain the required data file and be inserted in

the source drive. The CD Duplicator will locate the data and update its firmware

automatically. During the update, do not turn off the power to the unit. The update

process is complete after the system resets automatically and displays the main

menu.

12.8 Compare Firmware

The

Compare Firmware

function compares the current firmware version in the

interface board to the update version in the disc.

12.9 H/W Diagnostic

The

H/W Diagnostic

function detects the devices connected to the interface board,

confirms functionality, and displays information about the hardware on the LCD.

12.10 Load Default

The

Load Default

function resets all settings to factory default values. It is

recommended that you reset to the default values if the CD Duplicator fails to

function properly after you make changes to the original configuration.

12.11 CD+G

The

CD+G

function enables or disables CD+G (karaoke CD) format support. The

default setting is

OFF

.

12.12 ISRC & MCN

The

ISRC & MCN

function enables or disables ISRC and MCN format support.

The default setting is

ON

.

12.13 CD-Text

The

CD-Text

function enables or disables the copying of CD-Text discs. The

default setting is

OFF

.

12.14 Switch USB Mode

The

Switch USB Mode

function is not applicable to either the CD-D13 or

CD-D17HD Tower CD Duplicators.

Note:

The CD+G value must be set to OFF before you can use the Track

Extraction features.

Section	Page
Safety Precautions	3
FCC Radio Frequency Interference Regulations	3
Copyright and Trademark Information	4
Piracy Statement	4
About This Manual	4
Table of Contents	5
List of Figures	7
Figure 1 . CD Duplicator Unit Package Contents 2	7
Figure 2 . Front Panel of the CD Duplicator Unit 3	7
Figure 3 . LCD Control Panel 4	7
Figure 4 . Rear Panel of the CD Duplicator Unit 5	7
Figure 5 . Copy Function on LCD Panel 7	7
Figure 6 . How to Handle Compact Discs (CD-R and CD-RW) 26	7
Figure 7 . Ejecting the Disc Tray 27	7
Chapter 1. Introduction	9
CD Duplicator Package Contents	10
Front Panel	11
Rear Panel	13
Chapter 2. Using the CD Duplicator	15
Setup	15
Basic Operation	16
Copying from the Optical (CD) Source Drive	16
Loading Data to and Copying from the Hard Disk Source Drive	17
Chapter 3. Tower CD Duplicator Functions	21
1 Copy	21
2 Test	21
3 Test & Copy	22
4 Verify	22
5 Compare	22
6 Prescan	22
7 Disc Info	22
8 Select Source	22
9 Image	23
9.1 Load	23
9.2 Delete Image	23
9.3 Image Info	23
9.4 Compare Image	23
9.5 Select Image	23
9.6 Select Src Drive	23
10. Edit Track (for CD only)	24
10.1 CD to CD Edit	24
10.2 CD to HDD	24
10.3 Play Audio Track	24
10.4 Close Session	24
11 Setup	25
11.1 Language	25
11.2 Burn Speed	25
11.3 Read Speed	25
11.4 Auto Start Drive	25
11.5 Startup Menu	25
11.6 Auto Verify	25
11.7 Auto Compare	26
11.8 Auto Prescan	26
11.9 Eject Disc	26
11.10 Burn on the Fly	26
11.11 Burn Mode	26
11.12 Display Time	27
11.13 Button Sound	27
11.14 Device Info	27
11.15 System Info	27
11.16 Quick Erase	27
11.17 Full Erase	27
12 Advanced Setup (Adv Setup)	27
12.1 UnderRun Protect	27
12.2 Overburn	27
12.3 Read Error Skip	28
12.4 Format HDD	28
12.5 Verify HDD	28
12.6 Burn-in	28
12.7 Update Firmware	29
12.8 Compare Firmware	29
12.9 H/W Diagnostic	29
12.10 Load Default	29
12.11 CD+G	29
12.12 ISRC & MCN	29
12.13 CD-Text	29
12.14 Switch USB Mode	29
Appendix A. List of Functions	31
Appendix B. LCD Messages	32
Normal Conditions (for all CD Duplicator models)	32
Normal Conditions (for CD-D17HD only)	33
Audio Editing	33
Appendix C. About CD-R and CD-RW Discs	34
Handling Discs	34
Loading and Ejecting Discs	35
Appendix D. Specifications	36
Appendix E. Technical Support and Warranty	37

TASCAM CD-D17HD Owners Manual - Page 29

Update Firmware, 12.9 H/W Diagnostic, 12.10 Load Default, 12.11 CD+G, 12.12 ISRC & MCN

Page 29 highlights