TASCAM CD-D17HD Owners Manual - Page 28
Read Error Skip, 12.4 Format HDD, 12.5 Verify HDD, 12.6 Burn-in
View all TASCAM CD-D17HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
12.3 Read Error Skip 12.3 Read Error Skip The Read Error Skip setting controls error skipping during reading of the source disc. If the setting is OFF and an error is detected, the target drive stops and displays the read error message. If the setting is ON, no messages will be displayed if an error occurs. The copy operation will be completed and the copy will include all errors detected during the process. The default setting is OFF. 12.4 Format HDD (For factory use only; please do NOT use this function.) Warning! Do not run this function. It will erase all data already loaded into disk partitions. This function is reserved for factory use only. The Format HDD option is valid only on the CD-D17HD Tower CD Duplicator, which features a factory-installed hard disk drive. The factory-installed hard disk drive has already been partitioned and formatted and is ready for use. 12.5 Verify HDD (For factory use only; please do NOT use this function.) Warning! Do not run this function. It will erase all data already loaded into disk partitions. This function is reserved for factory use only. The Verify HDD option is valid only on the CD-D17HD Tower CD Duplicator, which features a factory-installed hard disk drive. The factory-installed hard disk drive has already been partitioned and formatted and is ready for use. 12.6 Burn-in The Burn-in function runs an emulate writer function continuously. The disc in the target drive is ejected and re-inserted automatically between each test cycle. This function can be prepared to run continuously or specified to run from 1 to 1000 times. 20 TASCAM Tower CD Duplicator User's Manual