TASCAM DM-24 Installation and Use DM-24 Basics v. 2.0 - Page 10

There are two locations called "Effect 1 and Effect 2" where these algorithms can be loaded. The source of the inputs to Effects 1 and Effects 2 can be Aux sends 1-6. Effect returns can be assigned to any of the 32 channels or directly to the stereo buss. Effects 1 and 2 can also be routed as "inserts" on busses 1-8; Aux sends 1-6 or the stereo buss. The internal effects can also be used with the "assignable" inserts. For instance, if a fretless bass is on channel 2 and chorus needs to be added to it, assign the chorus effect to assignable insert #1 and assign insert #1 to channel 2. Using the assignable insert saves an aux send and two return channels. Effect 1 and Effect 2 can also be run in series. This would allow you to run a delay into a reverb, for instance. Machine control The DM-24 can control a wide variety of external devices via RS-422 ( P2 or 9pin), MIDI Machine Control or the DTRS remote jack. There is a list of supported devices on the machine control page. The DM-24 can control multiple devices simultaneously. A standard example would be controlling the transports of a VTR, while arming tracks on a DTRS machine. 10