TASCAM DM-24 Installation and Use DM-24 Basics v. 2.0 - Page 12
With the controller you have access to 19 of the most common controller
![]() |
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
There is also an external control page on the DM-24. This is where you can set up separate MIDI fader layers and controller pages. Any combination of fader layers and controller pages can used up to a total of 8. With the MIDI fader layer, fader 1 is MIDI channel 1, fader 2 is MIDI channel 2, etc. A single controller number is selected for ALL faders. You can have up to 8 MIDI fader layers. Each layer would represent a different MIDI controller number. With the controller page you have access to 19 of the most common controller numbers. These are accessed using the POD knobs and Data wheel. Each of these controller pages represents one MIDI channel. You can use a total of 8 controller pages which would give you access to 8 different MIDI channels. 12
![](/manual_guide/products/tascam-dm24-installation-use-dm24-basics-v-20-ce2d5e9/12.png)