TASCAM DM-24 Installation and Use DM-24 Basics v. 2.0 - Page 19

Operating @ 96kHz In Hi Sampling mode the DM-24 is a 16 channel console. Only the first 8 mic pres can be used in this mode. The outputs are configured very intelligently. TDIF 1- Buss outs 1-4/Direct out 1-4 or Aux 1-4 TDIF 2- Buss outs 5-8/Direct out 5-8 or Aux 1-4 TDIF 3- Buss outs1-4/Direct out 1-4, Buss outs 5-8/Direct out 5-8 or Aux 1-4. Having the ability to use the 8 busses allows you to mix in 5.1. • There is only one 2-channel digital I/O in 96K mode. Assignment choices are: Stereo outputs, Buss 1-2, 3-4, 5-6, 7-8, Aux 1-2, 3-4 or the control room outputs. • There are only 2 assignable sends and returns available. • The Master Compressor Insert Matrix is limited to one stereo compressor assignable to the stereo buss, buss 1-2, 3-4, 5-6, 7-8 or Aux 1-2, 3-4. • Expander/Gates are only available on channels 1-8. • All channel EQ and compressors are exactly the same as 48K operation. • AES/EBU can be input or output in either HIGH SPEED or DUAL LINE. • HIGH SPEED can send 2 channels of data at 96K on one AES/EBU cable. The DM-24 has two AES/EBU I/Os built in. DUAL LINE requires both jacks to send two channels. Some machines only use one format or the other. Some machines do not call these modes HIGH SPEED and DUAL LINE. For instance, the MX-2424 refers to DUAL LINE as ½ SPD, 2 Line. Snapshots You can store 95 user snapshots in the DM-24. As mentioned earlier in this document there are four ROM snapshots in the DM-24: These snapshots cannot be deleted. These snapshots will always be there for you to use as a template for your own snapshots. 19