TASCAM HS-8 Firmware V1.40 Instruction Manual - Page 4
New functions in firmware V1.30
View all TASCAM HS-8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
HS-8 New functions in firmware V1.30 The following functions have been added in firmware V1.30 00 Network functions (FTP, Telnet and VNC) 00 REMOTE/KEYBOARD and EXTERNAL Control Lock/Unlock settings 00Take Rename function 00Rec Fn Stop Monitor function 00Monitor muting function 00Slate tone function 00USER BITS Source setting function 00Addition of take end time code display 00Ability to receive digital input signals that are in consumer format 00Clear function can be executed using the SHIFT and BACKSPACE keys on an external keyboard 00Cursor can be moved using the up and down arrow (2/x), HOME and END keys of an external keyboard 00 Title display changes on the PROJECT screen 00PROJECT key now moves up a level when the PROJECT screen is open. Network functions (FTP, Telnet and VNC) added ETHERNET page added to the REMOTE SETUP screen Use this to make settings related to Ethernet communication. IP Address/Subnet Mask/Default Gateway editing screen Touch the corresponding area of the REMOTE SETUP screen ETHERNET page to open its value setting screen. 00Each field can contain up to 3 digits. (You do not need to input "0" before values of 1-2 digits.) 00The first field is selected when a screen opens. 00After a field is selected, touching a number button will enter that digit. When touched, further digits will be added to the end of the same field. 00Touch the period (point) button to move to the next field. Example Screen opened 192. "1234" input 234. "." input 234 168. 1. 1 168. 1. 1 (First "1" is discarded) 168. 1. 1 STATUS This shows the unit's MAC Address and current IP Address. IP MODE Use these buttons to enable or disable Ethernet functions. Setting buttons: Disable(default value), Enable IP SETUP Use to switch between DHCP and STATIC. When set to DHCP, and there is a DHCP server on the LAN, the IP Address, Subnet Mask and Default Gateway items should be automatically acquired. When set to STATIC, you must set the IP Address, Subnet Mask and Default Gateway items manually. Setting buttons: DHCP, STATIC (default value) LINK SPEED Use these buttons to set the link speed. Setting buttons: AUTO (default value automatically adjusts speed according to connection), 100M (operates with fixed speed of 100 Mbps.) Password Set the password. (See "CHANGE PASSWORD screen" below.) IP Address/Subnet Mask/Default Gateway These show the current values of these settings. When IP SETUP is set to STATIC, use these field to set the values. (See "IP Address/Subnet Mask/Default Gateway editing screen" below.) Default values: 0. 0. 0. 0 Depending on the IP SETUP setting, this area appears differently as shown below. CHANGE PASSWORD screen Touch the Change button in the Password section of the REMOTE SETUP screen ETHERNET page to open the CHANGE PASSWORD screen where you can set the password. Up to 9 characters can be used. DHCP STATIC Field selected 4 TASCAM HS-8