TASCAM HS-P82 Owners Manual - Page 15
Next Take, PAN/LVL Screen, Playback
View all TASCAM HS-P82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2 − Names and functions of parts PAN/LVL Screen, Playback In solo mode, the alphabet and the number area cannot be selected. When the unit is put in recording standby, the file name of the take to be recorded is shown above the scene/take name button on the Home Screen. In the following cases, --- appears and the value cannot be changed. •• No project or scene is loaded •• The selected CF card is unavailable •• The current take is 999 w PAN/LVL button Press this button to open a screen with pan pots and level adjustments for stereo mix recording and the output signal from PHONES and LINE OUT. Information Screen, Playback 0 Recording media This shows which of the two CF slots is being used, as well as the remaining recording time for the current sampling frequency, bit rate and number of recording tracks. The background of the media that is currently being used appears green during playback and red when recording. If there is no media in the slot, dashes are shown and the background is grey. If the card has no project, NoProject appears. When a CF card is inserted during recording into an empy, unused slot, UNMOUNT appears. When recording is stopped, either the remaining recording time or NoProject appears. When an unformatted CF card is inserted, UNFORMAT appears. Press this part of the screen to open the CF SELECT screen (media selection screen). (See "Formatting a CF card" on page 23.) q REC TRACKS button Press this button to show the record function buttons and the buttons to edit the take number (Next Take). Next Take The take number can be set using one letter from the alphabet and a number from 1 to 999. Touch the alphabet area (it becomes yellow) and use the +/- buttons or the DATA dial to change the value. Press the number area to highlight it in yellow and turn the DATA dial to change the value. If you press a PAN or 2MixLVL knob on a channel, the parameter can be controlled with the DATA dial. If two channels are linked, the PAN knob functions as a balance adjustment knob. When in solo mode, PAN or 2MixLVL knob cannot be selected. e INFO button Press this button to show the current settings of the unit and information about the loaded file. The Sys. Info screen shows the current settings of this unit. Touch this part of the screen to open the SYNCT/C screen. The File Info screen shows information about the currently loaded file. Touch this part of the screen to open the PROJECT screen. r Mark List button Press this button to open the mark list. (See "Mark list screen" on page 48.) t Manual Locate button Press this button to open the screen for locating manually. (See "Manual locate function" on page 50.) 15 TASCAM HS-P82